Cheap cf-aa62j2c m1 16V,45W laptop ac adapters

1. original adapter for panasonic cf-aa62j2c m1, 16V, 2.8A, 45W, laptop ac adapters

Click to view more pictures
	Product ID: 1061281 Input: AC 100~240V 50~60Hz Output Voltage: 16V Output Current: DC 2.8A Power: 45W Connector: 5.5mm*2.5mm Property: original [?] Warranty: 12 months

Relevant panasonic Laptop Batteries

Click for more pictures
	Product ID: 1002859 Battery Type: Li-ion Property: original [?] Voltage: 11.1 V Battery capacity: 7800 mAh Color: Gray Warranty: 9 months

Relevant panasonic Laptop Batteries

Click for more pictures
	Product ID: 1003211 Battery Type: Li-ion Property: replacement [?] Voltage: 10.65 V Battery capacity: 6600 mAh Color: Gray Warranty: 12 months

Relevant panasonic Laptop Batteries

Click for more pictures
	Product ID: 1003506 Battery Type: Li-ion Property: original [?] Voltage: 10.8 V Battery capacity: 6750 mAh Color: black Warranty: 9 months

Relevant panasonic Laptop Batteries

Click for more pictures
	Product ID: 1003580 Battery Type: Li-ion Property: original [?] Voltage: 10.8 V Battery capacity: 4200 mAh Color: Black Warranty: 9 months

Panasonic cf-aa62j2c m1 laptop ac adapters can replace the following part number:

cf-aa62j2c m1 laptop ac adapters is compatible with the following models :

How to check the panasonic cf-aa62j2c m1 adapter problem

  1, Make sure the cf-aa62j2c m1 AC adapter is firmly and securely plugged into the wall outlet. Check adapter indicator light. Many laptop AC adapters have a power indicator light on the adapter brick. Check for this indicator light and if there is one, make sure it is light up with a green light. If you see a power indicator it is a good indication that the adapter is at least receiving power.

  2, The metal tip on the panasonic cf-aa62j2c m1 adapter cord needs to be firmly attached to the laptop for the laptop to receive power from the adapter. Also, in either the metal tip on the adapter or the connection on the laptop, there is often a small metal pin. Make sure this pin is not bent or broken as that can cause a problem with the laptop receiving power from the adapter.

  3, Use a multimeter. Plug in the AC adapter. Then touch one probe to the negative part of the plug (usually the outer casing) and the other to the positive contact (typically a pin inside the plugs outer casing). Your looking for a match on the voltage and amperage listed under “output” on the sticker on the adapter. You don't need to worry about touching the positive probe to the negative contact and vise versa, it will not hurt it and you'll get the same reading either way.

If you see voltage or amperage that jumps around from high to low a lot, Ditch that adapter immediately, it can seriously damage anything it's plugged into.

If the voltageis off by just a bit that's ok, same goes for amperage. But if it's more than 1 volt or 1 amp off be concerned.

Note: a laptop should always be matched to an adapter that provides the exact voltage the sticker on the bottom of the laptop calls for. Again, 1 volt or less off is OK but not ideal. Anything under or over can damage the laptop. But amperage can go over and more than what is called for can be desirable as it will charge the laptop battery faster.

SSL-encrypted Connections, Secure Shopping Guarantee

Shopping with us is safe and secure. None of our customers have ever reported fraudulent use of their credit cards as a result of shopping with us.When you purchase panasonic cf-aa62j2c m1 laptop ac adapters from us, You can be assured that the information you give us is confidential. We do not sell, rent or share information of our customers with other parties.